Position the Movi on your Dresser

The Movi Cocoon is designed to rest on your dresser without the use of an adhesive or attachment. We pass all safety certifications for infant changing pads, so the use of an attachment is not required. If you would like to change your baby on the floor or in another changing space, simply move the Movi. 

For cleaning up messes, simply use a baby wipe to wipe down the pad, immediately after use. Never submerge your Movi into water. You can use a mild dish detergent with a wet sponge as well. 

Attach the Strap to the Pad

You’ll notice that the strap will arrive in the box unattached to the pad. 

1. The narrow part of the strap goes on the bottom of the pad. Make sure the narrow part of the pad threads through the bottom cut-outs. The Velcro beans are designed to keep the strap in place. 
2. We recommend placing the branded tag on the left side wall, closest to your hip while you’re changing the baby. 
3. Make sure that the Velcro strap attaches closest to the wall, on the right hand side wall. 

While you’re placing your baby on the pad, the strap should fall away from the dresser. The Velcro beans will keep the strap in place, even while it’s open. It's best to keep the strap attached to the pad as much as possible to preserve the longevity of the Velcro. 

Positioning Your Newborn 

Newborns are especially tiny, and they need to be positioned higher on the Movi Cocoon. You may want to keep the strap open during changing, as newborns won’t wiggle or turn over on the pad. Always keep one hand on your baby while changing. 

It may help to put a burp cloth or a towel under their head for additional comfort. 

You’ll notice that the Movi Cocoon is designed with an incline. This becomes especially helpful for older babies, ages 3+ months and up and to help with “run-off” during accidents. 

If you’re having trouble with your Movi Cocoon, please write in to Support@MoviFamily.com and we’d be happy to answer any questions that you may have!